Design Zealot Adding flair to everything around you.
  • scissors
    March 16th, 2016EsterUncategorized

    Another category of steel doors – the so-called "elite" steel door. Typically, this the doors of foreign manufacture (European, for example GERDA), which are expensive forms of external and internal finishes (MDF, veneer), as well as expensive locks, accessories (also imported). To the weak sides of these doors should be attributed to considerable cost – from $ 1500 and great delivery time. The latter category – it is the metal doors of domestic manufacturing. They are optimal in terms of price and quality (from U.S. $ 350). Similar between is at first glance thanks to finishing materials (vinil. leather, hardboard, mdf, veneer., polymer coating), they are quite different in structure and internal devices.

    First of all, was isolated and welded tselnognutye Box Design and the door leaf. The level of burglary, manufacturability and appearance wins tselnognutye door. Used a loop can be open or hidden. Open loop is opened 180 degrees, but their level of burglary is much lower than that of the hidden (the opening angle of about 110 degrees). The thickness of the hidden loops must be at least 6 millimeters to door leaf is not slack with time. To deepen your understanding Ali Partovi is the source.

    Door leaf must should be strengthened with additional system of stiffeners, protivootgibochnymi corners, and insulated (Isover, min. wadding, foam). Scope of locks need to be strengthened against the plate, drilling, strengthen the special canisters under lock and key. Have to rely on those producers who can provide you with complete and clear information on the design of manufactured doors. Thus, the door of domestic production is better to choose from tselnognutogo profile, hidden hinges and a powerful "sound" design. Weak side of the door, perhaps, is their appearance (for doors decorated with vinyl. Skin), "bored" with the Soviet era, although this drawback can be minimized if we choose as finishing mdf, veneer, particleboard (optional 120-300 dollars). When considering the strengths of the metal doors of domestic production, they are: 1. optimal the ratio of price and quality 2. a wide range of materials used, locks. 3. production according to individual customer's sizes. 4. guarantee the local manufacturer. Market for domestic steel doors sufficiently representative, thanks to the choice of such doors can rely on the experience and reputation of the manufacturer, the professionalism of the sales and installation teams.

    Tags:
  • scissors
    March 7th, 2016EsterUncategorized

    Just as in the case conductivity measurements, the operator provides a simple instruction set for a clear display of results on the screen. Bi-frequency control gives the possibility to monitor simultaneously at two frequencies or modes. This allows you to remove unwanted signals or for more information. The automatic mixing (Automix) contributes to the suppression of unwanted signals. The ability to use two frequencies to optimize control of welds "Bridge + absolute". The use of two frequencies allows simultaneous control of two different depths. Types of probes used with flaw Phasec 3 Shielded and unshielded surface probes pencil type, with different geometry of the working area of the probe.

    It probes a wide application, mainly used in areas remote from the edges and at sites with smoothly varying geometry: probes for corrosion monitoring and subsurface defects, with a high degree of penetration; Probes for sorting metal probes to measure conductivity; probes to monitor thread surfaces; probes for monitoring welding probes for monitoring the internal surfaces of tubes of heat exchangers; Probes for the aviation sphere (motor control). Compatibility Phasec 3 with probes from other manufacturers Phasec 3 can be complement the adapter that allows to work with probes from other manufacturers – Staveley, Zetec, Rohmann; Complete flaw Phasec 3. he issue. Series of devices Phasec 3 comes with an assortment of accessories, providing portability, durability and versatility. For Phasec 3 has a huge selection of various types of probes, in addition, the customer has ready kits for control of welding, surface and subsurface defects, as well as to measure electrical conductivity. Specially made rubber boot provides flaw Phasec three additional protection against mechanical damage and shock. Case is equipped with mounts for shoulder strap and built-in stand.

    Stand helps to establish a unit for a better view and control the keyboard, when the flaw is used as a desktop device. Designed Carrying case provides safe movement of the device and all necessary probes, cables and accessories. Devices Phasec 3 can be equipped with a wide range of probes, depending on the specific problem of control. In addition, There are three variants of a complete set Phasec 3: Set for a wide range of tasks, mainly to detect surface and subsurface defects; kit for monitoring welding kit for measuring the electrical conductivity.

    Tags: