Design Zealot Adding flair to everything around you.
  • CONTEC GmbH Developed A New Edge Splitting Filter

    0
    scissors
    May 30th, 2017EsterUncategorized

    An application example in the filtration of highly viscous bitumen at high temperatures. The CONTEC industrial equipment GmbH from Bad Honnef is a leading manufacturer of filtration systems, oil mist separators and level measurement. In the area of development, CONTEC can document an application example in the production of Kaltselbstklebedampfsperrbahnen for large roof areas at RASCO bitumen GmbH. The challenge: Medium: polymer bitumen for Kaltselbstklebedampfsperrbahn temperature: 130 C viscosity at 130 C: approx. 100,000 of mPS viscosity at 140 C: of approx. 45,000 mPS as subsidiary company of a leading international provider of construction adhesives produced the RASCO bitumen Technology GmbH in Augustdorf, among others cold-adhesive thin layer bitumen sheets for roof surfaces over 2,500 m with a thickness of about 3 mm. At this low layer thickness in the production problems inevitably. Polymer bitumen is 3 mm on a plastic-coated carrier foil at 140 C with a layer thickness of? 0, applied.

    To avoid that it comes to errors in the production process, it is necessary to filter the hot bitumen polymer mass. Due to the high viscosity of the ground when the temperature falls, disassembly and maintenance of the filter only in hot condition are possible. The solution: Hot bitumen is a newly developed edge splitting filter of CONTEC with hinged lid and inner spring loaded clutch filtered. In addition, the filter with a heating jacket is equipped, through which he can be incorporated into the existing factory thermal oil system. This design is a tool-free removal of the filter element at full operating temperature. The filter reliably holds back the aggregation so that production takes place without interference.

    About the CONTEC GmbH industrial equipment the CONTEC GmbH industrial equipment from Bad Honnef manufactures innovative systems and components in the areas of air and gas filters, oil mist separator, liquid filter and level measurement. How to contact with : contec: GmbH industrial equipment Helmut Scherer Aegidienberger str. 69 D-53604 Bad Honnef, Germany phone: + 49 (22 24) 98 93-18 fax: + 49 (22 24) 98 93-20 homepage: E-Mail: press contact: contec: GmbH industrial equipment Iwona Kugler of Aegidienberger str. 69 D-53604 Bad Honnef, Germany phone: + 49 (22 24) 98 93-23 fax: + 49 (22 24) 98 93-20 homepage: E-Mail:

    Tags: ,

Comments are closed.