For thermal insulation of the roof using mineral wool or basalt fiber. These materials are lightweight, which is not unimportant for the roof and have excellent thermal insulation, vapor-permeable, not burn or support combustion, does not attract the microflora (mold, fungi), are not edible for rodents, long-lasting. After putting insulation between the rafters, attach to the last bars of gypsum sheathing under the skin. To avoid cutting the many bars on the shorter segments in their most can be fixed as a whole, including in areas cut into the roof of the windows (and later, after fixing cladding exposed parts of the bars saw off flush with the edges of drywall sheets.) To attach furring sheetrock screws 9.5 mm. Homemade backstay kolochennaya of the two bars of suitable length, can strengthen the skin sheets without an assistant. Screws vvertyvayut using the cordless screwdriver with a special attachment. Maximally allowable distance between the screws – 250 mm. The joints between the gypsum sheets shpatlyuyut.

The pediment wall insulation after sheathe thicker plasterboard or similar thin, but in two layers. Together with insulation gypsum sheathing meets the highest standards and more fire protection. You can apply this technology and how the use of vapor barrier materials, as moisture can get inside and in the form of vapor, rising from the interior of the house. In the cool atmosphere under-roof design, they turn into water, which fills the air pockets in the insulating material. To create a path of vapor insurmountable barrier to the inside of the heater to perform a vapor barrier, which is in the form of vapor barrier film plank lapped and nailed through the slats to the rafters. Joints of panels and contiguity of the material to the walls and other structures of connective adhesive tape glued. The height of the attic rooms shall be not less than 220 cm, usually take 230-250 cm in height sloping ceiling vertical sections of the walls must be at least 160 cm Sometimes these walls make the doors and place them in cupboards or shelves for storing clothes and other things taking up so the attic space.

Also, be aware that the width of the house to the attic to the device not be less than 5m. At a lower value will not be able to make enough room width. In a smaller room would be extremely difficult, almost impossible to place even the most necessary furniture. To increase the area of the attic is often resorted to such a device: the walls 'pushing', while reducing their height to 120 cm in order not to offend a head sloping ceilings, the walls are arranged low furniture – sofa, shelves, tables. To highlight the attic floor the best option – the use of sloping windows, embedded in the roof slope. Today's skylights are reliable, leak-proof, durable and easy to use and care, plus – excellent retain heat.

Related posts:

1. Roofs Plank roof sheathing on, made of unedged boards laid horizontally, or close some gaps, depending on the material used to make...
2. Construction Especially important is the quality vapor barrier for steam Russian bath – it has more than 50% humidity. Acoustic device frame-obshivnyh...
3. The Walls The remaining material parameters (Insulation, sound insulation, durability, weight, cost and installation time) are tabulated and you will find the most...
4. Metal Windows One of the highlights of repair is to install windows. Now at the peak of the popularity of plastic windows. Most...
5. Construction And you can paint in any color, if it is, of course, allows the material. But our task – even the...