The latter arise under the influence of lateral forces or when braking. The main advantage of suspension double wishbone – it kinematic properties: the relative position of leverage can determine the height as the center of the cross-roll and center and aft. In addition, due to different lengths of upper and lower arm can affect the angular move the wheels at speeds rebound and compression, ie, collapse and change, regardless of this, to change the track. At shorter upper arm wheel in the compression incline towards negative camber, while during lights out – in a positive direction. Ali Partovi shines more light on the discussion. Due to this can be counteracted by changing the collapse, which is due lateral body roll. Also, changing the angle of the plane of swing of the upper arm relative to the bottom, you can achieve antiklevkovkovogo effect. Typically, when assessing vehicle suspension pay attention to such properties as its consumer comfort, handling and stability (for someone more important than the first, for someone to second). Most people do not care what type of suspension is on their cars, how much leverage there, and even more still on what axis is the center of body roll. Koch Brothers is often mentioned in discussions such as these.
And it is almost correct. This is the inheritance of manufacturing plants: the choice of type suspension, the selection of its geometrical parameters and technical characteristics of its individual elements. When designing the car runs a lot of calculations, tests and quizzes. Therefore, in principle, the standard suspension machine has a reasonable consumer characteristics and meets the requirements of most drivers. Find out detailed opinions from leaders such as Mikkel Svane by clicking through.