Moreover, it needs to develop autonomy to relativize, to preserve, to redimensionar and to transform the constituent aspects of practical the pedagogical one. For this, it is basic that the professor in formation also lives deeply the moment of the descontextualizao (BRAVE, 2003). The proposal of insertion of the New technologies of information and communications (NTIC? s), divided in a conception of society educational paradigm; the many attempts of insertions of the NTIC? s in the education process? learning as a whole known as NTIC? s distributed by the modalities of actual formation and in the distance (EAD) in the measure where the supports if adjust the necessities and contents. The exercise of the evaluation favors the problematizao and the reflection, essential factors for the exploration of these aspects. The set of clippings verified concerning the Formation of the Professor, the attempt of incorporation of the NTIC? s practical the pedagogical ones can thus certify the thematic relevance of privileged the bibliographical verification, are important, therefore explicit that the searches designated I finish to it of the previous section they send to a discursiva dimension. The movement of configuration of the studies in this source tends to identify to the effort of the union between the communication and the education in the Formation of Designers. Of the point of view of this article, the choice this marked in the heading: evaluation of design institucional in the educative pedagogia of the individuals. The trend is excellent if to interiorizar and regionalizadora in order to indicate the relevance of the importance of the cultural products, In this ticket of the visible one for the appearance, if makes necessary to recognize e, in certain way, to integrate three modalities of treatment: the visual document as register produced for the observer; the visual document as register or part of the observvel, in the observed society; e, finally, the interaction enters observed observer and.
Month: April 2014
Easter Designer
On Easter Saturday visitors in the designer can make outlet Berlin seeking to 200 hidden Easter eggs and win with plenty on Easter Saturday can be visitors in the designer outlet Berlin on the search after 200 hidden Easter eggs and win with plenty: 50 vouchers for the designer outlet Berlin worth 10 euros and even one in the value of 50 euro see the surprises. The rest can look forward to a tasty price of Lindt. At Easter, the Easter Bunny in the designer has plenty to do in outlet Berlin. Who goes on April 3 in the designer outlet village on egg hunt, will be rewarded. About 200 eggs hiding in every corner of the village and wait with great surprise coupons for big and small.
The Center information we obtain delicious chocolate Easter Bunny in Exchange for Lindt or vouchers to the value of 10 or even 50 euro. A search that is worthwhile, because winning is the same with designer fashion, that is throughout the year 30 70% below regular retail prices, including brands such as Strenesse, Daniel Hechter, , Easter itself present St. Emile, gull, Marc O’Polo Polo, replay, adidas and Nike. Just three days later, the designer outlet Berlin for all hip hop enthusiasts and for those who want to become it, offered another special event. The ecko unltd presented on April 6. Outlet store at the designer outlet Berlin the ECKO WRITER TEAM\”. Known sprayer from the scene give T-Shirts or other clothing for only 15 euros with their spray or airbrush art a personal touch, where there are no limits to individual wishes.
Framed is the event DJ sounds of matching hip hop, and with a little luck you can a ecko unltd. Win merchandise voucher worth 300 euro. As always, the great actions in the designer outlet Berlin offer a shopping experience for the whole family.
New Mannequin Designs
Responds with new mannequin designs, as well as a new Web shop Woerner on current market trends new webshop in a first step has adapted its online storefront to the changed needs of buying the company, so to accommodate the increased online purchases. In the new E-shop buyers and buyers get the availability and the delivery status to name two examples or push all products of a decoration proposal on clicking Add to cart”, explained Project Director Selma Okcu. (see). Mannequin special catalogue as a further measure was due to increased demand after mannequins (mannequins), who registered the company in the past few months the special catalogue mannequins 2010 “moved. This will show not only our own developments, but also models of from different manufacturers. Through this wide range of trendy and high quality mannequins of different price classes we can cover the entire market,”explained Oliver Fernandez, Sales Manager of Heinrich Woerner GmbH, the redesigned cooperation. Continues to be the heart of the company of shipping service articles from the fields of decoration, Visual sales tools and shop equipment. Spring – / Sommerdeko in a timely manner presents Waite the current trends of the cities as well as of the company’s own design developments.
This year, oversized animal heads for mannequins, which act as an absolute eye-catchers are the highlight. More current Dekotrends can be found in the current spring / summer catalog or online store (www.dekowoerner.de). Service for journalists: free images for publication download link with mannequins made by Waite & friends: PR/Mannequins.zip sustainability Woerner, here you will find the logos to the mission statement: PR/Nachhaltigkeit.zip instructions for opening the download link (ZIP compressed folder for printable image material) step: download (click on link and download the ZIP file) step: Save ZIP folder (Select destination directory) Step: Open ZIP folder step: unzip a ZIP program (E.g. win ZIP / 7-ZIP / ZIP file) step: select target directory for unpacking / setting step: after successful unzip the folder can as usual be opened and used the footage information: get the images, for one-time publication. All reproduction rights are at the Heinrich Woerner GmbH, Leingarten.
Interior Design
Why? Very simply, any house periodically shrinks and slabs "walk." Moreover, with redevelopment of flats, where interior walls break down, a difference of heights can reach 50 See In such cases, much more reliable and easier to make a false ceiling. This is a decorative design that covers the "native" flat ceiling (ceiling tiles). This method is called experts and "dry." The main advantage – almost complete absence of mud during the repair work. No need to mess with stucco and plaster, cover furniture and floors from flying in all directions, splashing. In short, this offsets the ceiling – quite appropriate. Therefore it is necessary to understand how and what you can do false ceiling.
And most importantly – how to do it properly and what are the options. The first variant. Simple head lining process is as follows. Initially, the surface ceiling clean of old paint and the base (filler, primer). Then attach the plate to the ceiling crates – metal slats.
If the concrete ceilings (which in most cases is true), the builders usually "Shoot," a crate of special construction gun plugs. If the ceilings of the softer material, the sheathing can be fastened on the screws. Of course, it is important not only to strengthen the crate at ceiling, and make it so that it was flat and at the same time firmly. Because it is the crate – a framework for decorative material (cloth), which will be sheathed ceiling. And if the frame is made uneven, and then Decorative plating does not align the ceiling. Decorative coating (painting) made from different materials. One of the most common – drywall. But we can take gipsovolokno, and laminate and particleboard and plywood, and linings, and even metal. In addition, the false ceiling can be very different shape (stepping stones, the waves – it all depends on the imagination of the designer).
More Than Dusting: Commercial Indoor Cleaning
Services from Tettnang Braitmaier inform a wide range of technical, business and administrative activities are necessary for the everyday operations of a commercial operation. But without the production of safe and hygienic conditions of work and production, no company can best exploit the performance potential of its employees. Cleanliness and hygiene are not only intended to be minimum standards for healthy working conditions. As the Tettnanger building cleaning experts of Braitmaier services as part of their commitment again and again, they also directly affect the image of every professional and company. Significantly, attracting new customers and employees depends on whether the premises of a company make a clean, clean impression. Especially in reception and Office areas, so regular, best daily maintenance cleaning is recommended. A look into the commercial production area reveals quickly, whether behind the Office and reception setting in fact, emphasis is placed on proper working conditions and results. Given the very different conditions-commercial action are to be obviously different demands on the hygienic conditions of industrial halls and other premises.
It can be assumed without further ADO that wood chips are created during production in a woodworking company and small oil spills on the ground are certainly in the image of a functioning garage. At the end of the working day, this work traces should disappear but again as quickly as possible, before a unhygienisches picture is. The Trade Hall cleaning must meet at least the legal provisions on worker protection and security. Real commitment proves a company if it goes beyond such minimal standards and producing ideal working conditions makes obvious value also in the area of hygiene. This significantly more diverse requirements as in the imagine on the cleaning staff Office cleaning.
With a sweeping out of the respective production areas, it is rarely done. An ordinary commercial Hall cleaning requires real commitment, professional knowledge of cleaning technology and intensive training in environmental and safety regulations. Braitmaier services puts emphasis therefore on a SECURITE, always motivated team of employees dedicated to the effective and at the same time proper cleaning by customer real estate. His range of cleaning the Tettnanger company provides further information at any time. Press contact Braitmaier services Reiner Braitmaier George str. 5 88069 Tettnang Tel.: 0 75 42 / 95 27 86 fax: 0 75 42 / 95 27 86 mobile: 01 76 / 28 82 83 92 E-Mail: Homepage:
Compulsory Insurance Are Not Without Another Termination
Auer Witte Thiel informed about groundbreaking BGH judgment to health insurance contracts Munich June 2013: health insurance according to 193 para 3 sentence 1 VVG only considered effective cancelled if confirmation of connection insurance has gone to the old insurance company. There is no retroactive validity on receiving notice of insurance. Auer Witte Thiel explains the decision of IV civil Senate of the Federal Supreme Court and the underlying case. In this particular case, a private krankenversicherter customer had concluded a new contract with another provider and with the old provider with approval of new insurance from 01 February to 1 December 2009 moved the commencement first due to delays in the termination. In a second letter dated June 10, 2009 the insured revoked the new contract but complete, whereupon him sued the following insurance on payment of the outstanding premiums. While the proceedings before the District Court had been rejected, the Court of appeal for the gave her Insurance period from 1st December 2009 to April 01, 2010 instead. The defendant went to revision, prompting the Supreme Court dissolved the State Court ruling and again handed the case to the Court of appeal.
Policyholder is avoiding risk of Doppelversicherungs the Court of appeal came to the conclusion that the original contract was not timely been withdrawn by December 12, 2008, with the termination. Because the right of withdrawal expired already in receipt of the letter, so that the withdrawal could relate VVG pursuant to 8 para 1 only on the provisions of the revised Treaty, Auer Witte Thiel explains. The original contract was so effective. It was also the Court and ordered the defendant to pay the outstanding premiums. Insurance needs clarity about the effectiveness of termination people with health insurance contracts with a term of more than one year with a notice period of three months to the end of the first year of insurance have may terminate however. This period would have been respected in the present case. The actual effectiveness of the termination depends not only the timely receipt of the insurance and their unequivocal content, but also, whether the old insurance in time had knowledge of the existence of a connection insurance. Confirmation was received by the defendant on June 18th, 2009 by its existing insurance.
In addition, must be tested in cases like these, whether a minimum insurance period was agreed, which can mean a maximum two-year exclusion of cancellation, adds Auer Witte Thiel. The case, Auer Witte Thiel provides additional information under available. About the law firm Auer Witte Thiel, the specialization areas of focus and the development of core competencies in certain disciplines are indispensable in the legal services sector. Auer Witte Thiel is a business law oriented law firm and represents several German insurance companies. The firm Auer Witte Thiel is Munich. How to contact with lawyers Bayerstrasse Auer Witte Thiel 27 80335 Munchen phone: 089/59 98 97 60 fax: 089 / 550 38 71 E-Mail: Web:
Get Income Online
WANT TO SEE MY REAL INCOME IN nextOne VIDEO FOUND IN THE LINK BELOW. It’s very interesting the amount of products you will find on the Internet to generate revenue and earn money online, but in this article I want to be very straightforward and give you a simple way which are the real ways to make money online and so you see they are real you attach a video to show you my income that may not be much compared to the gurus but are more realistic and possible if you dedicate time and do things as should be, and I mean this as there are several steps to follow before making a website and provide a product or service, for example, a small market survey to find the niche to which you want to go run, see if there is demand for what you sell, analyze prices, see what offered by your competition, etc..
Do not try to do something to do, remember that this is going to generate revenue so it is a bit more complex than you imagine but not complicated or difficult to do, I now turn to what I want explain what are the ways to generate revenue online and I will qualify according to my view and experience: FIRST ALTERNATIVE TO EARN MONEY ONLINE One of the alternatives to make money online and many speak are own digital books which must be developed in line with a theme that dominates one, like it or you have a lot of passion, so going to be simple because the development is a topic which you have much knowledge and master, now go to more important and if I think it’s worth doing a business or not based on a digital book and my answer is (SI) but this response is tied to many aspects that will make you achieve this goal, such as whether there is demand , a lot of competition, reasonable prices, etc.
CFC Form
Availability of logic that allows to manually set the timings purge steaming and cooling. As well as configuring for data operations. Thus, For example, selecting a program providing for the operator to do not purge in time and by the value of the gauge. The presence of alerting the operator. For example, if during an automatic cycle, the accident occurred, it is necessary inform the operator about it. Then the operator takes the installation in manual mode and completes the cycle under his own control. Find a Solution: The first step is to replace manual ball valves to supply pair in block form for automatically operated ball valves. Were selected ball valves are equipped with pneumatic actuators and limit switches in order to tap in the event of failure or for some reason neotkryvaniya it was able to identify this automation problem and inform the operator about the accident.
To drive the door lock and load valve in block form of cylinders were used, also equipped with position sensors or end- breakers – to identify emergency situations in case of failure or lock nezakryvaniya door. Control of pneumatic actuators was taken to using the terminal systems. On task required that the operation of steaming and cooling systems have the ability to control the pressure in block form. Namely: the completion of the operation should take place steaming and cooling to achieve some particular pressures. That is, as soon as the required pressure is reached, the operation is completed. For this purpose very well come contact gauges. The choice of automation Aries As the controller was chosen OWEN PLC 100 with two expansion modules MDVV. This equipment is ideal for automation unit form as all the input signals arriving at the controller input and output signals from the controller are discrete.
Also a big plus for the selection of the controller was that included with the controller is supplied free software for PLC programming and detailed instructions with a description and examples. Program PLC has been written with CoDeSys SFC and CFC. The program consists of a sequence of steps. In each step the analysis of the input signals from limit switches valves, cylinders and pin gauges. If input signals satisfy the condition, the output signal to control pneumatic and magnetic starters. At the end of the cycle of forming the foam block the program returns to the first step and stands in the standby mode as long as the operator presses the "Start" button. Also, for visualization and human-machine communication has been selected operator panel FE-320. This panel is used to display information about the sintering the block of foam and input time intervals for the operation of "blowing", "Steaming", "cool" and "push" as well as to select the configuration "Steaming" and "cool." For example, you can choose before starting the cycle of "cooling" is not on time, as indicated by the gauge. Changing these parameters allows to achieve better performance shop and product quality. Video of the block form can be look at the site of industrial automation VyatkStroyDetal GP.
Managing Director Terminals
Ingenico will provide upgrades for its terminals, with which the new infrastructure in the health system is mapped. Fehmi Koru Paris, 18 December 2013 – Ingenico (Euronext: FR0000125346), leading provider of payment solutions, was from T-Systems International GmbH, as well as in the consortium to CompuGroup medical, Booz & company and KoCo connector chosen partner; both bidders won the Gematik, making the development and testing of new telematics infrastructure in the health care. Each consortium will develop a test region in Germany, set up and operate, to test the services planned for the future updating of patient data and the application of the qualified electronic signature (QES). Together with the electronic health card and the health care practitioner certificate, the new e-health terminals will make a significant contribution to the security of the infrastructure. Ingenico developed a new firmware for its e-health terminals, which installed terminals with the coming nationwide Telematics infrastructure can be connected.
With more than 150,000 terminals installed, Ingenico healthcare/e-ID covers almost half of the market and is a leader in the field of e-health Terminal solutions in Germany. The Ingenico in France is group leader in the area of e-health card solutions for doctors, hospitals and pharmacies. In France already 45 million secure updates are performed that in pharmacies, hospitals, and other public areas of installed Ingenico terminals per year of health insurance cards. Oliver new foot, CEO of Ingenico healthcare GmbH, explains: “we are proud to participate in this first comprehensive test phase, which should lead to the nationwide use of the telematics infrastructure. This demonstrates the power of our technology that will be used as reference and confirms our market leadership.” Mathieu Gagnard, Managing Director of the Ingenico healthcare/e-ID, adds: “we are pleased that T-systems and the Consortium CompuGroup in helping to build a new generation health infrastructure.
We are highly motivated to occupy a leading position in the field of security solutions and services for e-health transactions. This renewed success underscores once again. our performance in the healthcare sector with an outstanding product, a sophisticated range of services and the recognised expertise of our European team” About Ingenico healthcare/e-ID Ingenico healthcare/e-ID is a range of Ingenico group, responsible for health care and e-ID applications. With nearly 100 employees in Europe and 800,000 installed terminals this area in France and Germany is a leader in healthcare applications. More in healthcare eid.ingenico.com on Ingenico (Euronext: FR0000125346 ING) Ingenico (Euronext: FR0000125346 – ING) is the world’s leading provider of payment solutions with more than 20 million terminals installed in over 125 countries. 4,500 Worldwide Staff assist retailers, banks and service providers, to optimize their solutions for electronic payments and secure, to expand its range of services and to increase yields.
High Quality Custom Liion
HY-LINE computer components presented new informative video on the topic of custom battery packs and battery management system. This video illustrates the career of the conception to the production of individual battery packs appealing way. Since 2003, the HY-LINE Group deals with the battery technology and develops and produces battery packs according to individual requirements with its customers. The areas of application of battery packs are versatile. High-quality rechargeable battery packs are both in medical technology, test and measurement, as well as professional audio and video technology. Special requirements in terms of mechanics, electronics, voltage, case be taken into account in the design. So arise special prototypes, which are released after extensive testing and certification for the production of the series.
The informative video of the firm of HY-LINE computer components on the subject of industrial battery packs, visit computer. More info videos on various topics are already in planning. Still, the HY-LINE GmbH for questions around the staff is available Subject of battery packs and battery management system at any time. For more information see: HY-LINE computer components Tel. 089 / 614503-40 fax 089 / 614503-50 email: computer