Many people want a level soil walk-in shower without flooding the bathroom. The new shower system society II therefore relies on a special shower floor and an invisible shower tray, which promises a safe water discharge and easy cleaning. The lower tile technology also enables the complete abandonment of silicone. The floor-level shower society II is not as usual increased the shower on the bathroom floor, but completely without interfering edges of baths built in the floor. The overlying shower floor is flush with the tiled bathroom floor. This walk-in shower without silicone drips water on all four sides of the shower floor on narrow drainage columns that including the stainless steel shower tray. Resolves a small latch on the shower floor, it can be folded up like the hood of a car. The shower tray is then exposed and can be easily cleaned.

Through a bracket at the bottom the “hood” or the shower floor remains safely open; the lightweight Opening and closing ensure integrated torsion bar springs. The invisible stainless steel shower tray is designed so that the seal to the walls and the floor is executed with a silicone-free. The shower enclosures can also find here securely. For mounting the barrier-free shower, two variants are possible society with an invisible shower tray. Depending on the structural conditions, the shower tray can be used directly on the concrete floor or integrated into a platform. Tiles or natural stone at a total height of 18 mm without gradient can be laid in the built-in shower base of the stainless steel shower tray. At the final assembly can the shower base and the assembled shower height be adjusted precisely until the maximum of 1.5 cm subsequently.