Plank roof sheathing on, made of unedged boards laid horizontally, or close some gaps, depending on the material used to make the roof. The roof of the roll materials (roofing felt, roofing, etc.) it is desirable to arrange with solid wooden flooring of the edging boards. The flooring is fastened to the rafters with nails, which should cap utaplivat in the body boards. Roll material is spread on the floor, carefully align and fasten the edges nails. Then nail strips that hold the packed material. Top rail cover strip roll material (caps), prikolachivaya their special Tolev nails. Along the lower edges of the roof on the roof folded 10cm under the crate and attach the same with nails. Under a steel roof can be arranged as a continuous and sparse crate.
Roofing sheets are connected to each other standing seam joints and fastened to the sheathing with nails. (Source: Ali Partovi). Wavy Asbestos sheets are placed so that they overlapped on the same wavelength, and each overlying sheet overlaps the underlying na12-14cm. Fasten them with special screws (nails), length 70-90mm, under which pre-drilled in the crests of the waves diameter holes at 2-3mm larger than the diameter screws (nails). Paul Paul porch plank plank single, boards are laid on the joists, embedded between the first and second lower crowns binding. Joists and floor boards should be covered with paint and antiseptized for outdoor use. Continuation of the floor veranda can be upper doorstep. The windows on the porch window sill is usually installed at a height of 45-60cm of sex, that is lower than the sills in the room.
The space between the window sill and the bottom strapping sewn shut with wooden clapboard or verandas schitami.Obshivku performed only on the outside, as in wall insulation is not necessary. Between the window sill and cantrail install windows. The space between the door and adjacent racks can be sewn tightly and set it narrow window frames.